Instruction Manual

MDDUCCFIRMWAREVERSION1.1SETTINGS
Copyright©2011DecimatorDesignPtyLtd,Sydney,Australia
8
GPI(GeneralPurposeInputs)
Configuration1(Tallies)
PIN NAME DESCRIPTION
1 GREEN_TALLY_EN GroundpintoenableGreenBlockTally
2 RED_TALLY_EN GroundpintoenableRedBlockTally
3 BLUE_TALLY_EN GroundpintoenableBlueBlockTally
4 RX+ RS422/RS485PositiveReceivePin
5 RX‐ RS422/RS485NegativeReceivePin
6 GREEN_BORDER_EN GroundpintoenableGreenBorder
7 RED_BORDER_EN Groundpintoenable RedBorder
8 GROUND Useasreferenceground.
Notes:
1. TheborderwillbeYellowwhenbothGREEN_BORDER_ENandRED_BORDER_ENare
enabled.
2. TheborderwillendattheSafeActionGraticule,adjustthistomoveitinorout.

SERVICEWARRANTY
Decimator Design warrants that this product will be free from defects in materials
and workmanship for a period of 12 months from the date of purchase.If this
productprovestobedefectivewithinthiswarrantyperiod,DecimatorDesign,atits
discretion, will either repair the defective product without charge for parts and
labour,orwillprovideareplacementproductinexchangeforthedefectiveproduct.
In order to service under this warranty, you the Customer, must notify Decimator
Designofthe defectbeforetheexpirationofthewarrantyperiodandmakesuitable
arrangementsfortheperformanceofservice.TheCustomer
shallberesponsiblefor
packaging and shipping the defective product to a designated service centre
nominated byDecimator Design, with shipping charges prepaid.Decimator Design
shall pay for the return of the product to the Customer if the shipment is to a
locationwithinthecountryinwhichtheDecimatorDesign
servicecentreislocated.
TheCustomershallberesponsibleforpayingallshippingcharges,insurance,duties,
taxes,andanyotherchargesforproductsreturnedtoanyotherlocation.
This warranty shall not apply to any defect, failure or damage caused by improper
use or improper or inadequate maintenance and care.Decimator Design shall not
be obligated to furnish service under this warranty a) to repair damage resulting
fromattemptsbypersonnelotherthanDecimatorDesignrepresentativestoinstall,
repair or service the product, b) to repair damage resulting from improper use or
connection to incompatible equipment, c) to repair any damage or malfunction
caused by the use of nonDecimator Design parts or supplies, or d) to service a
productthathasbeenmodifiedorintegratedwithotherproductswhentheeffectof
such a modification or integration increases the time of difficulty of servicing the
product.