Quad (3G/HD/SD)‐SDI to HDMI Multiviewer and Converter OPERATING MANUAL DMON‐4S OPERATING MANUAL VERSION 1.
Contents DESCRIPTION Introduction Main Menus Input Status Menu Control Menu Multi‐Viewer Menu M.V. (Multi‐Viewer) Routing Menu Setup Menu Menu Tree Warranty PAGE 2 3 3 3‐5 5‐6 7 7 8‐9 10 Introduction Thank you for purchasing the DMON‐4S Quad (3G/HD/SD)‐SDI to HDMI Multiviewer and Converter. The DMON‐4S is a truly portable converter, which incorporates our new easy to use LCD and button control system.
Main Menus Upon power up the unit will start in the Main Menu pointing to Input Status. The Main Menus are: 1. Input Status 2. Control 3. Multi‐Viewer 4. M.V. Routing 5. Setup Press the < and > buttons to move left or right through the menus. To enter into a menu press the ENTER button. Notes: 1. Defaults are highlighted in yellow. 2. When an option is changed, a highlighted S will appear in the top right of the LCD screen and will disappear when the options are saved after 10 seconds.
. Control / HDMI Out4 Type (Parameter) This is the current HDMI output type for output 4. This sub menu operates the same as Control / HDMI Out1 Type. 5. Control / HDMI Out1 Source (Parameter) This is the current source for HDMI output 1. When the sub menu is highlighted, press ENTER to toggle through the following sources: 1.) Input 1 2.) Input 2 3.) Input 3 4.) Input 4 5.) Multi‐View 6. Control / HDMI Out2 Source (Parameter) This is the current source for HDMI output 2.
6.) 10 minutes 7.) 30 minutes 8.) Never Multi‐Viewer: (Has SUB‐MENUs) Multi-Viewer MV Audio Source Input 1 Main Menu <== Sub Menu Parameter Window When highlighted in the Main Menu, press the ENTER button to enter this sub‐menu. Press the < and > buttons to move left or right respectively through the 10 menus below and press the BACK button to go back to the Main Menu when finished. The current value for each Sub Menu is shown in the Parameter Window. 1.
5. Multi‐Viewer / Quad 1 Aspect (Parameter) This is the aspect for quadrant 1. When the sub menu is highlighted, press ENTER to toggle through the following aspects: 1.) Input = Output 2.) Letter/Pillar bx 3.) Centre Cut 6. Multi‐Viewer / Quad 2 Aspect (Parameter) This is the aspect for quadrant 2. When the sub menu is highlighted, press ENTER to toggle through the following aspects: 1.) Input = Output 2.) Letter/Pillar bx 3.) Centre Cut 7.
M.V. (Multi‐Viewer) Routing: (Has SUB‐MENUs) M.V. Routing MV Audio Source Input 1 Main Menu <== Sub Menu Parameter Window When highlighted in the Main Menu, press the ENTER button to enter this sub‐menu. Press the < and > buttons to move left or right respectively through the 4 menus below and press the BACK button to go back to the Main Menu when finished. The current value for each Sub Menu is shown in the Parameter Window. 1. M.V.
Menu Tree Input Status Control 1. HDMI Out1 Type a. DVI RGB444 b. HDMI RGB444 2C c. HDMI YCbCr444 2C d. HDMI YCbCr422 2C e. HDMI RGB444 8C f. HDMI YCbCr444 8C g. HDMI YCbCr422 8C 2. HDMI Out2 Type a. DVI RGB444 b. HDMI RGB444 2C c. HDMI YCbCr444 2C d. HDMI YCbCr422 2C e. HDMI RGB444 8C f. HDMI YCbCr444 8C g. HDMI YCbCr422 8C 3. HDMI Out3 Type a. DVI RGB444 b. HDMI RGB444 2C c. HDMI YCbCr444 2C d. HDMI YCbCr422 2C e. HDMI RGB444 8C f. HDMI YCbCr444 8C g. HDMI YCbCr422 8C 4. HDMI Out4 Type a.
Multi‐Viewer 1. MV Audio Source a. Input 1 b. Input 2 c. Input 3 d. Input 4 2. MV Format a. SD 480i59.94 b. SD 576i50 c. HD 1080i60 d. HD 1080i59.94 e. HD 1080i50 f. HD 1080p30 g. HD 1080p29.97 h. HD 1080p25 i. HD 1080p24 j. HD 1080p23.98 k. HD 720p60 l. HD 720p59.94 m. HD 720p50 n. HD 720p30 o. HD 720p29.97 p. HD 720p25 q. 3G 1080p60 r. 3G 1080p59.94 s. 3G 1080p50 3. MV Reference a. Input 1 b. Input 2 c. Input 3 d. Input 4 e. Free‐Run 4. MV Asp,Size&Bord a. 16:9 100% No Bdr b. 16:9 100% Border c.
SERVICE WARRANTY Decimator Design warrants that this product will be free from defects in materials and workmanship for a period of 12 months from the date of purchase. If this product proves to be defective within this warranty period, Decimator Design, at its discretion, will either repair the defective product without charge for parts and labour, or will provide a replacement product in exchange for the defective product.
