Instruction manual

9
TECHNICAL SPECIFICATIONS
MS-100
RF SECTION
MODULATION: FM, 75 kHz deviation
FREQUENCY SELECTION: 88.1 to 107.5 MHz
FREQUENCY PRECISION: .005%
SPURIOUS REJECTION: 45 dB min.
SPURIOUS REJECTION: 45 dB min.
MAXIMUM POWER: 250µV/m @ 3 m (FCC Part 15 compliance for USA)(RSS-210 for Canada)
: 1.0miliwatt (DOC RSS-123) (Canada only).
CERTIFICATION STANDARDS: FCC Part 15, CNR-123, CNR-210
HOMOLOGUATION #: FCC: MCHMS-100, INDUSTRY CANADA: CAN 1857102155, CAN 1857231121
AUDIO SECTION
MODE: mono (HI-FI): (Mono Unbal, Mono Bal, Mono Mic)
Stereo (HI-FI): (Stereo Unbal)
FREQUENCY RESPONSE: 20 Hz - 20 000 Hz, @-1dB (Mono Unbal, Mono Bal, Mono Mic)
20 Hz - 15 000 Hz, @-1dB (Stereo Unbal)
TOTAL HARMONIC DISTORTION: 0.05% max (All models)
SIGNAL TO NOISE RATIO: 70 dB min. (All models)
DYNAMIC RANGE: 80 dB min. (All models)
STEREO SEPARATON: 35dB Min, 40dB Typ (Stereo Unbal)
INPUT SENSITIVITY: -9.7dBm to +22.7dBm, 6K Ohms (Mono Unbal)
- 5dBm to +22dBm, 600 Ohms (Mono Bal)
-58 dBm to +22dBm, 950 Ohms (Mono Unbal)
-8dBm à +22.7dBm, 10K Ohms (Stereo Unbal)
PHANTOM POWER: +15 Volts DC (unloaded) (Mono Bal & Mono Mic models only)
INDICATORS: Power status, over modulation status.
CONTROLS: Modulation volume, frequency selection (10 bit dip switch).
MISC
POWER SUPPLY: 115/16vAC @ 300Ma.
DIMENSIONS: 6.3" (L) X 10.5" (D) X 1.75" (H)
WEIGHT: 5 lbs.