User's Manual

The alarm function can be set in the APP, and up to 5 alarms can be set (the alarm time will
be reminded when the set alarm time is over 2 minutes)
Why can't the watch receive the message push?
A: Because the Android mobile phone background will automatically clean up the software which is not commonly used, it will cause
the watch to drop and no longer push the message.
Solution: Set YFit to start automatically in the background of the phone
1: Confirm that the message push switch is enabled on the mobile APP side.
2.To make sure messages could displayed normally in the mobile phone’s notification bar. The watch message push is pushed by
reading the mobile phone notification bar message; if there is no message in the mobile phone notification bar, the watch will not be
able to receive the push. Note: You need to find the notification settings from the phone’s settings, Turn on the notification f mobile
end such as WeChat, QQ, phone, SMS, etc. (Depending on the area or software version difference, some functions may not support
push, such as: QQ only supports the Chinese version’s Push)
3. YFit Android background running permission: Open YFit APP, select the device page,click to enter the "Background running
permission". The APP automatically recognizes the phone model and follows the prompts to perform the jump operation (iPhone
phone does not need this operation)
4.Specific setup steps(for iOS phone)