Parts List

2
②.After charging is completed, the charging indicator is always
on.
Note: When charging the battery, it is recommended to turn off the
battery. The charging time is about 2 minutes to fully
charge;Be careful not to charge it for a long time, so as to
avoid overcharging the battery and battery bulging, which
will affect its service life.
2.4 Insert / Remove Micro SD (TF) Memory Card
1. Insert the TF card: Insert the memory card into the card slot in
the direction of the arrow, with the back of the memory card
facing the lens. If fully inserted, the card will fit into the slot.
2. Pull out the TF card: Use your fingernail to hold the edge of the
memory card, and gently press the card into the camera to
make the memory card pop out of the card slot.
Note: Please use the brand authentic TF card. The SD card
supports 8G-126G (high-speed card of class 10 or above is
recommended .The use of low-speed cards may cause the
machine to freeze or other problems).
2.5 Key Function Introduction
Power key /
Back
key/Mode
button
Short
press
Under power-on mode, short press mode switch.
Long
press
In the off state, long press to turn on.
long press for 3 seconds to turn off.
Shooting
button /
Confirmation
button/
Playback
stop button
Short
Press
①
.In the recording interface, short press to
record; short press again to stop recording.
②
.In the photo interface, short press to take a
photo.
③
.In the setting menu, short press to confirm the
set parameters.
④
.During video playback, short press to start
local playback, short press again to stop