Parts List

10
8.1 Power frequency
Optical frequency has two options: "50Hz and 60Hz". The default
optical frequency is "50Hz". Select the light frequency to eliminate
screen flicker during recording. In standby mode, if the screen
does not flicker, you do not need to adjust the light source
frequency parameter.
8.2 Sounds
Sound settings include "shutter, boot-up, beep , volume" four
options.Shutter, power-on sound, and key sound can be switched
on and off by default. There are four options: “On”, “Volume 1, 2,
3”. Use this option to set the volume of the keys and the volume of
the power switch. The default volume is "2".
8.3 White balance
White balance has five options: "Auto, Daylight, Shade, Tungsten
light, White fluorescent". The default white balance is "Auto".
8.4 Effects
Effects include "Normal, Black and White, Natural, Negative,
Warm, Brightness Contrast" six options. Default "Normal"
8.5 LDC
LDC has “On, Off”, the default is “On”, which can improve the
photo distortion and distortion caused by the lens under certain
conditions
8.6 Date&time
This option allows you to set the camera's time and its year /
month / day display format.
Note: After entering this menu, you can switch by short pressing
the electric shooting button and short pressing the Wi-Fi button to
set the time. After the setting is completed, short pressing the
shooting button returns to the main menu bar.
8.7 Screen saver
The screen saver has five options: "off, 1 minute, 3 minutes, 5
minutes". Auto screen off means that the machine automatically