DB32S 4KUltra HD Waterproof motion camera
Introduction: Thank you so much for purchasing this head sports video camera. It can take photos and record 4K videos. In addition, you can download an APP on smart phone which lets you preview and make operation for video recording and photo shooting on APP after Wi-Fi connection. You can edit photos and videos after downloading and sharing to social media platforms Safety: 1. Do not drop, bump or puncture this product 2.
Contents I. Component Description.................................................................... 1 II.Battery installation and key functions....................................... 1 III. The indicator function description....................................................... 3 IV. The basic operating instructions................................................... 4 V. Wi-Fi use instructions................................................................... 6 VI. Setting of recording parameters........
I. Component Description II.Battery installation and key functions 2.1 Installing the battery 1. Open the battery cover by moving in the direction of the arrow. 2. Install the battery accurately according to the positive and negative terminals of the battery. 3. Close the battery cover and make sure the battery cover is securely attached. 2.2 Removing the battery 1. Open the battery cover by moving in the direction of the arrow. 2. Grasp the battery and pull out the battery. 2.
②.After charging is completed, the charging indicator is always on. Note: When charging the battery, it is recommended to turn off the battery. The charging time is about 2 minutes to fully charge;Be careful not to charge it for a long time, so as to avoid overcharging the battery and battery bulging, which will affect its service life. 2.4 Insert / Remove Micro SD (TF) Memory Card 1.
Playback. ①In video/photo mode, press to open the Wi-Fi button/ down button/ Set button Short corresponding Settings menu Press ②In the setup menu and playback mode, short press is the function of turning down. In standby mode, long press the Wi-Fi button to Long turn on Wi-Fi. After successfully connecting with the APP, the APP controls the machine to take Press photos and videos. At the same time, long press the Wi-Fi button to turn off the Wi-Fi. III. The indicator function description 3.
② Fully charged, red light off IV. The basic operating instructions 4.1 Switch on and off Long press the power button ( ) of the device, the machine will enter the standby state, the indicator light is always green, short press the switch mode again, in any state, long press the power button for 3 seconds to release the hand, the machine will shut down. 4.
When the machine is in the standby state, press the "power button" to switch the mode to the playback interface, then press the "Wi-Fi button" to select the picture icon, and then press the "Shooting button" to directly enter the picture playback interface; you can press the "Wi-Fi button” to scroll down and select For the picture file being played, press the "power button" to exit the playback interface. 4.
For Android user: Search “iSmart DV”in GooglePlay For IOS user: Search “iSmart DV”in APP STORE 5.2 Connect to Wi-Fi ① Turn on Wi-Fi: The machine is in the standby state. Press and hold the "Wi-Fi" key to turn on Wi-Fi, and the Wi-Fi name and password will pop up on the screen of the machine. ② Connect to Wi-Fi: Search for the name of Wi-Fi with your mobile phone, such as: DB32S_XXXXX, enter the initial password 12345678, and click Connect to connect to Wi-Fi.
memory, the value The smaller is the opposite. Users can adjust the sharpness of the device by setting the resolution. Tip: In recording mode, press the "WiFi" button to enter the recording setting interface 6.2 Exposure compensation There are five options for exposure compensation: "+2.0, +1.0, +0.0, -1.0, -2.0". The default exposure compensation is “+0.0”. Exposure compensation refers to improving the shooting effect by setting the exposure value in some special scenes. 6.
Note: You need to select a resolution of 120 frames to use 6.7 Fast Motion Movie Fast motion recording includes "off, 2x, 4x, 6x, 10x, 15x" six options. The default is "off". After selection, the recorded video is accelerated according to the selected multiple Note: Video files recorded with interval recording have no sound. 6.8 HDR(High dynamic range) High dynamic range includes "on, off" and "off" by default.
7.4 Time-lapse photo interval Time-lapse photo interval options "Off, 3 seconds, 5 seconds, 10 seconds, 30 seconds, 1 minute" six options. Interval shooting Takes each frame at a set interval and forms a photo. The time interval determines the elapsed time between each frame of the shot. 7.
8.1 Power frequency Optical frequency has two options: "50Hz and 60Hz". The default optical frequency is "50Hz". Select the light frequency to eliminate screen flicker during recording. In standby mode, if the screen does not flicker, you do not need to adjust the light source frequency parameter. 8.2 Sounds Sound settings include "shutter, boot-up, beep , volume" four options.Shutter, power-on sound, and key sound can be switched on and off by default. There are four options: “On”, “Volume 1, 2, 3”.
turns off the screen and goes to sleep after no operation. The default screen saver is "Off". 8.8 Auto power off There are four options for automatic shutdown: "1 minute, 3 minutes, 5 minutes, 10 minutes, and shutdown". Automatic shutdown refers to the automatic shutdown time after the machine is turned on without any operation. The default automatic shutdown is "off". 8.9 Power-on auto record There are two options of “on and off” during boot recording.
8.14.1 Restore to factory setting The default setting is "YES, ON". When “YES” is selected, the system factory parameters will be restored. 8.14.2 System Information This option allows you to query the firmware version information of the current machine. 8.14.3 Card Information This option can query the used space and remaining capacity of the TF card IX. Frequently Asked Questions 9.1 Why can't the host computer be turned on? Answer:The battery is exhausted and needs to be fully charged 9.
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna.
