Specifications

11
d. Open the valve at the filter to promote
draining of the flexible oil return lines
into the filter pan.
e. If using solid shortening, always make
sure the flexible oil return lines are
clear before turning off the filter motor
and hang any flexible lines up to drain.
Solid shortening will solidify as it cools
and clog the lines.
4.5 CLOSING:
a. When closing at night, filter the oil in
all fryers and drain the filter lines.
b. Cover the open tanks of oil.
c. All TC-25/35s: Turn the combination
gas valve control knob clockwise to
“OFF”.
d. TC-35 120-volt Solid State Controller
(Optional): Turn the fryer power
switch located on the front panel
“OFF”.
4.6 SHUT-DOWN: When closing down
for periods longer than overnight,
a. Drain the frying compound and clean
the vessel thoroughly.
b. Either discard the frying compound or
return it filtered to the vessel and then
cover it.
c. Non-stainless Fry Vessels Only: If
frying compound is discarded, lightly
coat the inside of the non-stainless
vessels with fresh frying compound to
prevent rusting of the bare mild steel
frying vessels.
d. TC-25/35 Millivolt Systems: Turn the
control knob on the combination gas
valve clockwise to “OFF”.
e. TC-35 120-volt Solid State Controller
(Optional): Turn the fryer power
switch “OFF”.
f. Turn the manual valve on the incoming
gas service line to “OFF”.