Programming instructions

DECATHLON SERIES GAS FRYERS
CHAPTER 1: SERVICE PROCEDURES
1-29
1.7.8 Replacing the Frypot (cont.)
31. Using a sharp knife or box-cutter,
cut the silicon seal between and in
front of the two frypots (two-vat
or more). Use care not to scratch
stainless steel surfaces.
32. Remove frypot from fryer by
lifting up and out.
33. Position the frypot upside down
on a suitable work surface.
34. Record position of the valve stem
in relation to the frypot prior to
removing the drain valve. If
equipped, remove microswitches
and mounting hardware from
valve prior to removal. Using a
suitable wrench, remove the drain
valve from the frypot. Use
Loctite PST567 sealant when
installing drain valve on
replacement frypot.
35. Reverse the above steps to install
replacement frypot.
Lifting frypot from fryer.
Cutting frypot seal prior to frypot removal.
Removing drain valve from frypot.