Programming instructions

DECATHLON SERIES GAS FRYERS
CHAPTER 1: SERVICE PROCEDURES
1-23
1.7.8 Replacing the Frypot (cont.)
13. Remove steel line from oil-return
valve and nipple by loosening
flare fittings on both ends. Hold
backup with an adjustable wrench
when removing fittings.
(Absorbent cloth or paper towels
should be placed under the oil
line prior to removal, to catch any
oil remaining in the lines.)
14. Unscrew both flare fittings
completely prior to line removal.
Remove oil-return line and set
aside (see Step 15 if line does not
disengage easily).
15. Turning the oil-return valve
slightly outward with a pipe
wrench or similar tool will
facilitate return-line removal.
Remove oil-return line after disconnecting flare
nuts.
Turn the oil-return valve slightly outward to facilitate
removal of the oil-return line.
Holding backup while unscrewing flare nut on
oil-return line.