Programming instructions

DECATHLON SERIES GAS FRYERS
CHAPTER 1: SERVICE PROCEDURES
1-20
1.7.8 Replacing the Frypot
1. Open fryer doors on fryer and remove filter pan (if applicable). Ensure computer and all power
switches are off. Drain and dispose of or store oil/shortening from all frypots prior to moving
fryer.
DANGER
Hot cooking oil/shortening will cause severe burns. Never attempt to move this
appliance when filled with hot cooking oil/shortening or to transfer hot cooking
oil/shortening from one container to another.
2. Turn gas valve off, then turn gas off at supply valve or meter. Disconnect supply line from gas
manifold at rear of fryer.
NOTE: If restraints are installed on the fryer, disconnect restraints prior to
disconnecting the gas supply line.
3. Unplug fryer from electrical supply source.
4. Remove fryer door for access to cabinetry components. Lift door up, disengage rod from lower
door bracket, remove and set door aside.
5. Remove basket hanger from flue
cap by lifting up and off of fryer.
(Some units may have a built-in
flue deflector on the basket
hanger). Units with basket lifts
will require the removal of the lift
arms prior to removing the basket
hanger.
6. Carefully pry up capping strip
with a screwdriver or similar tool.
Remove capping strip and set
aside.
Removing basket hanger.
Removing capping strip.