Programming instructions

DECATHLON SERIES GAS FRYERS
CHAPTER 1: SERVICE PROCEDURES
1-15
1.7.4 Replacing the High-Limit Thermostat
1. Turn fryer off and drain cooking oil/shortening from the frypot. Allow the frypot to cool
completely before proceeding.
2. Perform steps 1-4 in Section 1.7.1, Replacing the Computer.
3. Remove fryer door for easier access (see Section 1.7.3, Step #3 for more detail).
4. Remove two screws securing the high-limit
mounting-bracket. Do not disconnect wires
from high-limit at this time.
5. Loosen and completely unscrew the
compression nut, then the pass-through nut
on the frypot bottom. Proceed to the next
step before removing high-limit from frypot.
Remove screws (arrows) securing high-limit to
fryer.
Compression nut unscrewed. Unscrew the pass-
through nut (arrow)