Quick Specs

Model #_______________ CSI Section 11400
8700 Line Avenue
Shreveport, LA 71106
USA
Tel: [phone]
Tel: [phone]
Fax: [phone]
E-mail: [e-mail]
www.frymaster.com
Bulletin No. 830-0125
Revised 2/13/15
Litho in U.S.A. ©Frymaster
MODEL
NUMBER
OIL
CAPACITY
OVERALL SIZE (cm)
DRAIN
HEIGHT
(cm)
NO. OF
TUBES
SHIPPING INFORMTION
WIDTH
(B)
DEPTH
(C)
HEIGHT
(A)*
WEIGHT CLASS CU. FT, DIMENSIONS (cm)
D150G
50 lb.
(25 liter)
15-1/2”
(39.4)
31-1/4”*
(79.4)
45”
(114.3)
17-1/2”
(44)
4
180 lbs.
(82 kg)
85
22
W
22”
(56)
D
36”
(91)
H
48-1/2”
(123.2)
D160G
75 lb.
(37 liter)
20”
(50.8)
36-1/2”*
(92.7)
45”
(114.3)
19-3/4”
(50)
5
255 lbs.
(116 kg)
85
40 29”
(74.0)
43”
(109)
55”
(140.0)
D180G
100 lb.
(50 liter)
22”
(55.9)
36-3/4”*
(93.4)
45”
(114.3)
19-3/4”
(50)
5
270 lbs.
(122 kg)
85 40
29”
(74.0)
43”
(109)
55”
(140.0)
DIMENSIONS
POWER REQUIREMENTS
A
(19)
7.62
(89)
35.00
C
(18)
7.20
(5)
2.00
(6)
2.60
6' PO
WER
(183)
CORD
2.60
(6)
GAS LINE
w/ 3/4" NPT PIPE
CONNECTION
B
38.75
(98)
DEPTH
HEIGHT
(138)
54.25
(60G,80G)
(84)
33.10
(50G)
C
TOP VIEW
FRONT VIEW SIDE VIEW
INCHES
(cm)
OPTIONAL
AUTO-BASKET LIFTS
SHOWN IN RAISE
POSITION
We reserve the right to change specications appearing in this bulletin without incurring any obligation for equipment previously or subsequently sold.
Check www.frymaster.com for updates.
*Without basket lifts.
HOW TO SPECIFY
The following description will assist with ordering the features desired for this
equipment:
D150G 50-lb. tube-type gas fryer with Thermatron controller,
RTD 1° compensating temperature probe and 1-1/4”
full port drain valve.
D160G 75-lb. tube-type gas fryer with Thermatron controller,
RTD 1° compensating temperature probe and 1-1/2”
full lport drain valve.
D180G 100-lb. tube-type gas fryer with Thermatron controller,
RTD 1° compensating temperature probe and 1-1/2”
full port drain valve.
MODEL
NO.
OPTIONS DOMESTIC/EXPORT
CONTROLS/
FRYPOT
FILTER
BASKET LIFTS/
FRYPOT
D150G
120V 1 A
220 - 240V 1 A
120V 8 A
220 - 240V 4 A
120V 3 A
220 - 240V 2 A
D160G
D180G
NOTES
• 1-1/2” (3.8 cm) kitchen main manifold gas supply line required. Gas inlet
size (I.D.) should be no smaller than that provided for connection to the
fryers. See service manual and/or plumbing codes for proper pipe sizing.
Recommended minimum store manifold pressure to be 6” W.C. for natural
gas and 11” W.C. for LP gas. Check plumbing codes for proper supply line
sizing to attain burner manifold pressure of 3.0” W.C. natural or 8.25” W.C. LP.
• One power cord supplied
• Please specify: Natural or LP gas; altitude if between 2,000 - 6,000 feet (610
- 1,829 Meters).
• DO NOT CURB MOUNT
CLEARANCE INFORMATION
• A minimum of 24” (61.0 cm) should be provided at the front of the unit for
servicing and proper operation, and 6” (15.2 cm) between the sides and rear
of the fryer to any combustible material.
Decathlon Gas Fryers -- Domestic & Export