Specifications

7-32
GENERAL INFORMATION
The Dean Electric fryers are divided into two main categories.
The SR (Super Runner) and Cool Zone models comprise the first category. The SR38E is an
economy fryer with thermostat controls. The Cool Zone models are all essentially alike in
design, with the primary differences being size, power usage, and oil capacity. Although
208VAC is the standard voltage, the Cool Zone fryers are also available in 240 VAC, 480
VAC, and other voltages used internationally. The table below lists the current production
units.
MODEL OIL
CAPACITY
kW FRYING AREA PRIMARY
CONTROLS
SR38E 20-23 lb. 12.0 / 14.0 / (21.0
HP*)
12" x 14" Thermostat
714E 22-28 lb. 9.0 6 3/4" x 14" Thermatron
1414E 40-55 lb. 18.0 14" x 14" Thermatron
1818E 70-85 lb. 13.5 / 18.0 / (21.0
HP*)
18" x 18" Thermatron
2020E 95-110 lb. 13.5 / 18.0 / (21.0
HP*)
20" x 20" Thermatron
18UE 84-103 lb. 17 / 20.5 18" x 24" Thermatron
* Indicates high performance
The second category of electric fryers includes a pair of flatbottom fryers, differing only in
size and oil capacity. These are essentially the same operationally as the Cool Zone fryers,
but structurally different because they are designed to cook a different of product.
MODEL OIL
CAPACITY
kW FRYING AREA PRIMARY
CONTROLS
1824E 35-43 lb. 19.0 18" x 24" Thermatron
2424E 65-95 lb. 19.0 24" x 24" Thermatron
COMPONENTS
Fixed Elements
All Cool Zone and Super Runner fryers, with the exception of the Model 714, have three
identical elements. The Model 714 has only one element. It is, however, a higher-rated
element than the elements used in Dean electric fryers.
The flatbottom models also have three heating elements. The middle element is different
from the side elements in electric Flatbottom fryers. The side elements are often hard to see