ES

FMI-S
Operation manual
Bedienungsanleitung
Notice d’utilisation
Instrucciones de servcio
Istruzioni per l’uso
www.alluris.de
Page 2 of 15
2.0 Before taking into operation
Please inspect the content before taking the instrument into operation. The following table
provides you with an overview of the delivery`s volume as well as the single components`
order number in case you want to purchase them at a later point of time.
2.1 Scope of supply
FMI-S10 FMI-S20 FMI-S30
Protective carrying case
Base unit (see type label with serial no. and measuring range on
the backside of the instrument)
Quick Start manual
Hook (FMI-962 M4 / FMI-962 M6 / FMI-962 M10) (-/ /-) ( / /-) ( / /-)
Cone tip (FMI-965 M4 / FMI-965 M6 / FMI-965 M10) (-/
/-) ( / /-) ( / /-)
Flat head (FMI-961 M4 / FMI-961 M6 / FMI-961 M10) (-/
/-) ( / /-) ( / /-)
Nochted head (FMI-964 M4 / FMI-964 M6 / FMI-964 M10) (-/
/-) ( / /-) ( / /-)
Optional accessories (not part of regular scope)
USB-interface cable (FMI-931USB) - -
Fmi_Connect software with USB cable (FMI-972) - -
Calibraton cericate with data (FMI-800N1 or ...N2) - -
Should, albeit our issuing check, parts be missing, please refer to your stockist or to us at ser-
[e-mail] immediately. More attachments and accessories can be found on our website
www.alluris.de also.
2.3 Ernergy Harvesting
The instrument utilizes, also when turned off, the ambient light at the work place as energy
source and charges an internal storage, to ensure that tests can be made even if the solar cell
is covered for a short while. After storing the instrument for more than 2 month in the dark,
you should expose it at least for 8 hours in regular working environment (> 250 Lux) before use.
2.4 Special accessories to apply forces by hand
Hand held force gauges series FMI-S can be utilized for on-site measurement also. In order to
apply forces manually, the housing comprises three M10 tap holes to attach handles on each
side or opposite the measuring axis.
FMT-941M10 FMT-942M10