ES

FMI-S
Declaration
of Conformity
Konformitätserklärung
Déclaration de
Conformité
Declaración de
conformidad
Dichiarazione di
conformità
www.alluris.de
According EC-Directive 2004/108/EG
(EMC - electromagnetic compatibility)
We hereby confirm that the below designated product is designed and manufactured in ac-
cordance to the general saftety and health requirements of EC-Directive 2004/108/EG (EMC).
With any non-authorized changes of the device or application this declaration becomes void.
Manufacturer: Alluris GmbH & Co. KG
Basler Strasse 65
DE 79100 Freiburg, Germany
Type Number: FMI-S10xx; FMI-S20xx; FMI-S30xx; (see type label)
Description: Digital Force Gauge
Serial Number: see type label
Applicable standards: EN 55022 (RF Emission)
EN 61000-4-2 (ESD)
EN 61000-4-3 (RF Field)
EN 61000-4-4 (Burst)
EN 61000-4-8 (Magn. Field)
Class B
Critera A
Criteria A
Criteria A
Criteria A
The compliance to the requirements of all applicable EU directives is conrmed by the CE-
marking of the product.
In accordance to WEEE Directive 2002/96/EC this device is ca-
tegorized as “Monitoring and Control Instrument” and should
not be disposed as unsorted municipal waste. You may return
it to Alluris for recycling (WEEE Reg.No. DE 49318045). For more
information please contact our website www.alluris.de.
Alluris GmbH & Co. KG
Freiburg, 13.08.2011
(Klaus Hartkopf - Managing Director)
Conrmation acc. DIN EN 10204, 2.1 (Calibration)
We hereby conrm in accordance to DIN EN 10204, 2.1 that this instrument has been tested
in accordance with ISO 9001:2008 approved procedures. The instrument meets all specied
technical data’s and the accuracy was tested better than the accuracy stated in the technical
data.
The equipment and weights used for test and calibration are traceable to the international
recommended (ILAC) and approved standards of the DAkkS (Deutsche Akkreditierungsstelle
GmbH) at the Physikalisch-Technischen Bundesanstalt (PTB).