ES

FMI-S
Operation manual
Bedienungsanleitung
Notice d’utilisation
Instrucciones de servcio
Istruzioni per l’uso
www.alluris.de
Page 13 of 15
9.0 Technical Data
FMI-S10 FMI-S20 FMI-S30
Measuring Range [N] A5 0 - 5
B1 0 - 10
B5 0 - 50 0 - 50
C1 0 - 100 0 - 100
C5 0 - 500 0 - 500
K1 0 - 1000 0 - 1000
K5 0 - 5000 0 - 5000
Resolution of display [N] A5 0,001
B1 0,002
B5 0,05 0,01
C1 0,1 0,02
C5 0,5 0,1
K1 1 0,2
K5 5 1
Measuring frequency (internal) up to 3,6 kHz
Display refresh rate 1 - 10 Hz
Peak capturing ca. 1 kHz
Accuracy (f.s. ± 1 digit) ±0,3% ±0,2% ±0,15%
Temperature offset (Tk relative) / K ±0,02%
0-Point offset (To absolute) / K ±0,02%
Tracking (To surpressed) AutoTara (automatic compensation)
Overload output
USB interface, max. app. 1kHz 2.0
Digimatic-Ausgang Digimatic cable
Analogausgang Analogue cable
+/-1 VDC
Memory function
Statistical function MAX | MIN
AVG | DEV
Limit (threshold) function
Temperature range (Operation) 0° ... 40° (max. 85%rH)
Temperature range (Storage) -5° ... 45° (store dry)
Protection code (5-100N) Protected against small parts (IP40)
Protection code 500N and higher splash proof (IP 65)
Weight 480 g
Dimensions (L x W x H) 150 x 82 x 29 mm
The gauges, apart from expendable and wearing parts, are maintenance-free.
Depending on the area and frequency of use, gauges should be regularly, namely at least
once a year, be checked and calibrated. Our calibration service (e-mail: [e-mail])
includes a technical check of the instrument, calibration (factory calibration) and, if necessary,
adjustment of the measurement range.