User Manual

IM-pAC Getting Started Guide 63

Issue Number: 5 www.camcoindex.com | www.destaco.com

Read Me First

Instructions

Safety Information Rating Data

Mechanical

Installation

Electrical Installation Keypad and Display

Parameters

Diagnostics

UL Listing

Information

Determines the boost level when Pr 41 is set to Fd or SrE.

2.4: 2400 baud

4.8: 4800 baud

9.6: 9600 baud

19.2: 19200 baud

38.4: 38400 baud

Defines the unique address for the drive for the serial interface.

Indicates the version of software installed in the drive.

Pr 46 to Pr 51 appear when Pr 12 is set to control a motor brake.

Defines the brake release and brake apply current thresholds as a % of motor current.

If the frequency is >Pr

and the current is >Pr

, the brake release sequence is started.

If the current is <Pr 47, the brake is applied immediately.

Defines the brake release and brake apply frequencies.

If the current is >Pr 46 and the frequency is > Pr 48, the brake release sequence is

started.

If the frequency is <Pr 49 and the drive has been commanded to stop, the brake is

applied immediately.

Defines the time between the frequency and load condition being met and the break

being released. The ramp is held during this time.

Defines the time between the brake being released and the ramp hold being released.