User Manual

46 IM-pAC Getting Started Guide

www.camcoindex.com | www.destaco.com Issue Number: 5

6 Keypad and Display

The keypad and display are used for the following:

• Displaying the operating status of the drive

• Displaying a fault or trip code

• Reading and changing parameter values

• Stopping, starting and resetting the drive

Figure 6-1 Keypad and display

6.1 Programming keys

The MODE key is used to change the mode of operation of the drive.

The UP and DOWN keys are used to select parameters and edit their values. In

keypad mode, they are used to increase and decrease the speed of the motor.

6.2 Control keys

The START key is used to start the drive in keypad mode.

The STOP/RESET key is used to stop and reset the drive in keypad mode. It can

also be used to reset the drive in terminal mode.