User Manual

IM-pAC Getting Started Guide 39
Issue Number: 5 www.camcoindex.com | www.destaco.com
Read Me First
Instructions
Safety Information Rating Data
Mechanical
Installation
Electrical
Installation
Keypad and Display Parameters Diagnostics
UL Listing
Information
5 Electrical Installation
5.1 Power terminal connections
Figure 5-1 Size A power terminal connections
Figure 5-2 Sizes B and C power terminal connections
*For further information, see section 5.3.1 Internal EMC filter on page 41.
Optional
ground
connection
+
L1 L2/N U V W PE
Supply
ground
Optional
line reactor
Braking
resistor
Mains supply
Optional
Thermal
protection
device
Stop
Start/
Reset
PE
Supply
ground
Internal
EMC filter
*
Optional
EMC filter
-DC
Optional ground
connection
Supply
ground
Optional
EMC filter
Optional
line reactor
Fuses
Mains supply
L3/N U V W
+
PE PE
L1 L2
_
L3/N U V WL1 L2
+
PE PE
_
Supply
ground
Internal
EMC filter
*
Start/
Reset
Braking
resistor
Optional
Thermal
protection
device
Stop
On the size B 110V drives, the supply should be connected to L1 and L3/N.
NOTE
The braking terminals are not available on the size A 110V drive.
NOTE