User Manual

36 IM-pAC Getting Started Guide
www.camcoindex.com | www.destaco.com Issue Number: 5
Output frequency: 0 to 1500Hz
Output voltage: 3 phase, 0 to drive rating (240 or 480Vac maximum set by Pr 08).
Table 3-4
The output voltage can be increased by 20% during deceleration. See Pr 30 on page 60
NOTE
The maximum continuous current inputs are used to calculate input cable and fuse
sizing. Where no maximum continuous input currents are indicated, use the typical full
load input current values.
NOTE
IMC Part Number
Phases ph Fuse Input cable Motor cable
131ph3phAWG
mm
2
AWG
mm
2
92C85797010000 x N/A 16 N/A 14 1.5 16 1
92C85797020000 N/A x N/A 6 16 1 16 1
9
2B9048
20
10000 x x 16 10 12 / 14 2.5 / 1.5 16 1
92B90482020000 x x 20 16 12 / 14 2.5 / 1.5 16 1
92B90482030000 x x 25 20 10 / 12 4.0 / 2.5 14 1.5
92B90482040000 N/A x N/A 10 16 1 1
6 1
92B90482
050000
N/A x N/A 16 14 1.5 16 1
92B90482060000 N/A x N/A 16 12 2.5 14 1.5
92B90482070000 x N/A 25 N/A 10 4 16
1
92B90
482080000 x N/A 32 N/A 10 4 16 1
92B90482090000 N/A x N/A 6 16 1 16 1
The two cable sizes for 92B90482010000, 92B90482020000 and 92B90482030000
refer to 1 and 3 phase values respectively.
NOTE