Instruction Manual

4
MIT-II - MIT/P - QUADROPAC DUP 500 14/04/2010 - 300015090-001-L
3 Control panel
3.1 Electromechanical components
1. Main ON/OFF switch
To take advantage of the pump cleaning function, do not switch
off the appliance in summer. Use the Summer mode for the
desired heating shutdown period.
Z
See: Operating mode.
If a remote control CDI 2 is connected, it will have no display
when the general switch is in the off position

.
2. Pressure gauge
* Depending on the model of the appliance, the pressure gauge
is manual (dial display) or automatic (pictogram display).
3. Alarm indicator
- Red indicator: The PAC is safe
- Green indicator: normal operation
- Red control light is flashing: Sensor fault
4. Reset button
2
13
0
bar
4
2*1
0 2 4 6 8 1012141618202224
A
2*
4
3
bar
C000142_00
SUNDAY
-04