Operation Manual

WARNING
In order to prevent any danger caused by an
unplanned reset of the thermal circuit breaker,
this appliance must not be powered through an
external switch, such as a timer, or be connected
to a circuit which is regularly switched on and off
by the electricity supplier.
WARNING
Depending on the settings of the appliance:
4 The temperature of the radiators may reach
80°C.
4 Do not touch the refrigeration connection
pipes with your bare hands while the
appliance is running. Danger of burns or
frost injury.
CAUTION
Do not neglect to service the appliance. Contact
a qualified professional or take out a
maintenance contract for the annual servicing of
the appliance.
1.2 Recommendations
WARNING
Only qualified professionals are authorised to
work on the appliance and the installation.
4 Regularly check that the water pressure in the
installation is between 1,5 and 2 bar.
4 Ensure that the appliance is accessible at all times for
maintenance purposes.
4 Avoid draining the installation.
4 Use only original spare parts.
4 Never remove or cover labels and rating plates affixed
to the appliance. Labels and rating plates must be
legible throughout the entire lifetime of the appliance.
AWHP-2 MIT-IN-2 iSystem
1. Safety instructions
10/06/2015 - 7629848–001–02
6