Operation Manual

73
GT 530ADDR_G30A/AE _IO_V4.0 09/2013
Start up procedures
S
FOR YOUR SAFETY READ BEFORE OPERATING
WARNING:
If you do not follow these instructions ex-
actly, a re or explosion may result causing
properly damage, personal injury or loss of
life.
A. This appliance does not have a pilot. It is equipped
with an ignition device wich automatically lights the
burner. Do not try to light the burner by hand.
B. BEFORE OPERATING smell all around the appliance
area for gas. Be sure to smell next to the oor because
some gas is heavier than air and will settle on the oor.
WHAT TO DO IF YOU SMELL GAS
• Do not try to light any appliance.
• Do not touch any electric switch; do not use any
phone in your building.
• Immediately call your gas supplier from a
neighbor’s phone. Follow the gas supplier’s
instructions.
• If you cannot reach your gas supplier, call the re
department.
C. Use only your hand to push in or turn the gas control
knob. Never use tools. If the knob will not push in or
turn by hand, don’t try to repair it, call a qualied service
technician. Force or attempted repair may result in a re
or explosion.
D. Do not use this appliance if any part has been under
water. Immediately call a qualied technician to inspect
the appliance and to replace any part of the control sys-
tem and any gas control which has been under water.
• Inspect for proper bafing insertion into ue
passes. All cleanout doors properly sealed. Burner
door closed and properly latched.
• Gas and oil systems ready. Proper vent
connections. Required combustion and ventilation
air provided.
• Waterside of system properly lled and vented of
air.
• Lighting instruction followed.
• To be performed by a licensed tradesperson in
accordance with the guidelines shown in this
manual. Follow burner manufactures instructions.
• Mandatory factory start-up report to be completed
and returned to comply with the warranty process.
• Proper operating instructions of equipment to be
related to operating personnel.