Operation Manual

57
GT 530ADDR_G30A/AE _IO_V4.0 09/2013
55. Installing the rear casing panel (MR245 or 246)
56. Installing the cable channel Cover:
1
3
4
2
1. Attach the 2 clip-on nuts on the side panels.
2. Attach the upper rear panel onto the studs and push it up.
3. Fasten with 2 screws H8 x 16 and serrated washers.
4. Attach the 2 lower rear panels onto the rear crosspieces.
Front
Rear
 Position the central plate on the cable channels with the round holes towards the front of the boiler.
 Attach with H8 x 30 screws and serrated washers.
GT 530A-15 to GT 530-17
Assembly and Set up