Operation Manual

56
GT 530A DDR_G30A/AE _IO_V4.0 09/2013
53. Installing the Fluegas box insulation (MR245 or 246)
54. Installing the rear crosspieces (MR245 or 246)
 Install in place the ue gas box insulation and the lower rear insulation.
 If the side crosspieces overlap at the rear by more than 7/8”/10mm, we advise you to saw them off using a hacksaw.
31
1/2”
/800mm
 Attach the 2 rear crosspieces (package MR245 or
MR246) behind the bend of the rear side panels and
fasten each crosspiece to the side panels using 2 screws
(Ø 3.94 x 12.7).
Assembly + Set up