Operation Manual

53
GT 530ADDR_G30A/AE _IO_V4.0 09/2013
47. Standard control panel (MD5 and MR246)
48. Installing the MD5 control panel
 Put the front crosspiece in place (package MR245 or MR246) and fasten with 2 screws (H8x30) and Ø 3.94 tapping screws
( x 12.7) and serrated washers.
3 x
3
2
1
4
6
6
4
5
1. Position the control panel on the rear bushes.
2.
Remove the 3 screws .
3.
Open the control panel (3 screws at the back).
4.
Secure the control panel (2 self-tapping screw 3,94 x 25
+ Serrated washers).
5.
Carefully unroll the various temperature sensor bulbs and
bring them out of the control panel through the opening
in the bottom on the panel. Cut out the top instulation to
free the boiler pocket.
6.
Secure the rear cover H (MR245 or MR246) to the panel
support using 2 screws EC CB 4 x 40 and serrated
washers. Close the control panel.
Front View
Rear View
Assembly and Set up