Operation Manual

35
GT 530ADDR_G30A/AE _IO_V4.0 09/2013
Assembly + Set up
18
Assembling the sweeping Covers
R1
F2
i
Each cover is tted with a system whereby it
can only be mounted with the handles turned
outward.
1
The covers are numbered from 1 to 4, and must be
tted with thermocord. The length of the thermocord
depends upon the cover and is given below.
2
Place the 2 no. 1 sweeping covers (with the handles
turned outward) on either side of the boiler starting
from the front. Distribute the other covers evenly.
 Fit the two locks of each cover between the sections.
3
Push the cover towards the outside of the boiler, to the
closed position.
4
Fasten the two brass nuts of each cover.
F2 R1
RearFront
Cover Model No.1 No.2 No.3 No.4
Boiler type Number of sweeping covers per type
Front Rear
GT 530A-15 2 4 2
GT 530A-16 2 4 2
GT 530A-17 2 6
GT 530A-18 2 2 6
GT 530A-19 2 6 2
GT 530A-20 2 6 2
GT 530A-21 2 8
GT 530A-22 2 6 2 2
GT 530A-23 2 6 4
GT 530A-24 2 8 2
GT 530A-25 2 10
GT 530AE-26 2 8 2 2
GT 530AE-27 2 10 2
GT 530AE-28 2 10 2
GT 530AE-29 2 12
GT 530AE-30 2 10 2 2
GT 530AE-31 2 12 2
GT 530AE-32 2 12 2
Thermocord
Length
52.5” /1,335mm 43.7”/1,110mm 35”/890mm 26.18 /665mm