Manualshelf

Operation Manual

ManualsBrandsDe dietrich ManualsAir ConditioningGT530AE Series
21222324252627282930
24
GT 530A DDR_G30A/AE _IO_V4.0 09/2013
9
10. Fitting the upper and lower assembly rods
Trim off any projecting ends of the thermocords ush with the coast sections.
On the lower assembly rods, t the following at each end in the given order : an expansion spring, a washer and a nut
(the holes of the front lugs must be aligned with the holes of the frame brackets as the assembly rods are used to make
the boiler body integral with the frame).
Stop tightening as soon as the gap between the spring spires is equal to about 2 mm.
Assembly + Set up