Operation Manual

57
De Dietrich Gas 310/610 ECO
Example (Factory setting is always = 0)
▪ Water pressure sensor on = 1
▪ Analog output % = 0
▪ Gas leakage control VPS on = 8
▪ Imperial units of / PSI = 16
The sum of these settings provided parameter setting 
(1) + (0) + (8) + (16) = 
Table 17 adjustment options/accessories
13.2.14 “low” speed with H/L control ()
Parameter , adjustable between 10 and 60 (x100) rpm. This setting only applies if the boiler is in High/Low
control mode (parameter
 = 21).
13.2.15 Boiler type ()
This code appears only when replacing the control unit. After placing the new control unit, code  appears
automatically in the display. The value  must be changed in to the correct value for your boiler type (see
mounting-instructions of the service unit
Options
Value
Sum
Boiler water pressure sensor off 0
Boiler water pressure sensor on 1
Analog output Heat output % 0
Analog output Temperature of [°C] 4
Gas leakage control VPS off 0
Gas leakage control VPS on 8
Metric units °C & bar 0
Imperial units °F & psi 16
Parameter :
…