Operation Manual

51
De Dietrich Gas 310/610 ECO
12.5 Counter mode ( , and ) (service level)
12.5.1 General
The boiler control records various data on the combustion trend of the boiler. This data can be read out in
counter mode. The following data can be read out:
▪ Hours run
▪ Total number of start attempts
▪ Number of shunt pump operating hours
▪ Number of shunt pump starts
▪ Number of internal resets (control unit)
▪ Number of hours energized (control unit)
12.5.2 Reading out counter mode
First enter the service code
 (see section 13.2).
Press the
 key until the required code (see table 15) appears in the code window.
The counter has 6 digits. The code window displays the following (in sequence):
Code figure, 1
st
, 2
nd
, 3
rd
 with a value in the  window.
Example:
Code window
 window value
   210000
   5700
   53
This means 215753 Hours run


Hours run


Number of successful ignitions attempts


Total number of start attempts


Number of shunt pump operating hours


Number of shunt pump starts


Number of internal reset (control unit)


Number of hours energized (control unit)
Cede figure
Meaning of readout in

window

Total number or total number of hours in the hundred thousand and ten thousands

Total number or total number of hours in thousands and hundreds

Total number or total number of hours in tens and units
Table 16 Counter mode readout
Table 15 Counter mode codes