Operation Manual

EN 4/USING YOUR APPLIANCE
40
• THE KEEP WARM FUNCTION
This function lets you keep the food hot after cooking.
Programming the keep warm function Display
Press OK and +/–, to select the KEEP WARM function, the
corresponding icon flashes.
Confirm the function by pressing OK.
Press +/– to reach the required cooking time.
Confirm by pressing OK, the lamp lights up, the oven starts.
Comments:
The maximum programming time for KEEP WARM is 15 minutes.
You may change the KEEP WARM time at any time.
• M1/M2/M3 MEMORY BUTTONS
The 3 memory functions allow you to record 3 regularly used programmes that you can then select
rapidly.
Programming a memory button Display
Programme the cooking of your choice.
Access the memory function by pressing long (5 seconds) on
OK. The M1 logo blinks.
Select the memory you want by pressing +/–.
Confirm your choice by pressing
OK . The memory and the
associated programme are displayed.
Press the STOP button to bring back the clock display.
Using a memory programme Display
Press OK, and press +/– to select the memory M1, M2 or M3.
The icon for the memory chosen blinks.
Confirm by pressing OK.
The memory programme is displayed and the oven starts up.
Comments:
If you programme another memory onto one of the 3 functions already programmed, the
previous programme is cancelled and replaced.
All functions may be memorised except SPEED DEFROST and KEEP WARM.