Operation Manual

EN
36
4/USING YOUR APPLIANCE
• MICROWAVE FUNCTION
Programming by power Display
Press OK, the MICROWAVE cooking mode is selected, the
microwave icon flashes.
Confirm the function by pressing OK.
The microwave icon
remains lit, 1000W blinks.
Press +/– to set the microwave power you want. Confirm by
pressing OK, the time start flashing.
Press +/– to set the required cooking time.
Confirm by pressing OK, the lamp lights up, the oven starts.
Comments :
If the door is opened during cooking, the appliance stops and the remaining time blinks in the
display. To end your cooking you simply close the door again and press OK.
You can change the time whenever you want by pressing +/–.
You can change the power setting by pressing C°/W, then press +/– to reach the power level you
want.
• REHEATING ON 2 LEVELS
In the microwave function, 500 W position, you can heat 2 dishes at the same time. If you choose
to do this, place one plate on the turntable and another on the grill at level 3.
Recommendations:
Cover the plates with microwave-safe cling film, a plate cover or another upside down
plate:
- for more uniform heating.
- to avoid drying of foods.
- to reduce the heating time.
- to prevent splashing in the oven.
The steam effect helps foods retain their flavours.
Type of food Quantity Time
Homogeneous foods such as purees,
peas, celery, etc.
2 x 200 g plates 4 to 6 min
Heterogeneous foods such as cassoulet,
stews, ravioli, etc.
2 x 300 g plates 6 to 8 min