Operation Manual

7
31/08/05 - 300005627-001-A CITY
3 Topping up the boiler with water (Example with City 2.24/II)
4 Troubleshooting
Checks to make before calling your fitter
The burner is not working
Example with City 2.24/II
(30/90 : for City Condens)
`It is cold.
- Check the boiler thermostat settings.
- If using a room temperature thermostat or a remote control
(Easymatic or Easyradio), check that it is set according to the
instructions.
A Under the boiler, open (+) the 2 valves until you reach a pressure of between 1 and 2 bar
B Close the 2 valves (-)