D- l i t e ELECTRONIC DRUM SET USER MANUAL
Operation Warning Operation Warning Instruction for Prevention of Fire, Electric Shock, & Physical Injury Instruction for Prevention of Fire, Electric Shock, & Physical Injury About Warning & Caution Signs About Warning & Caution Signs This sign the risk serious physical injuryinjury or or This indicates sign indicates theof risk of serious physical even even death. Please operate the machine according to to death. Please operate the machine according WARNING WARNING instructions. instructions.
WARNING WARNING Please read the following Please read the following instruction before operation. instruction before operation. Do not open or, in or, anyinway, Do not open anymodify way, modify the machine or adapter. the machine or adapter. Do not attempt to repair the the Do not attempt to repair machine, or replace any internal machine, or replace any internal parts parts by yourself, unlessunless instructed by yourself, instructed to do to sodo by so theby manual. In case the manual.
WARNING WARNING ShouldShould any of the anyfollowing of the following situations result, please situations result, stop please stop operation and remove the adapter operation and remove the adapter from the socket, and consult with with from the socket, and consult your retailer, the nearest customer your retailer, the nearest customer service,service, or any of orthe anyrecognized of the recognized retailers listed on the information retailers listed on the information page: page: • The • adapter or the
Precautions Precautions Please read the following precautions asideaside from the safety instructions Please read the following precautions from the safety instructions Power Power SupplySupply Precautions • Do not power other Additional Precautions • share Do notthe share the supply power with supply with otherAdditional electronics that canthat produce cable statics, electronics can produce cable statics, • During operation, please handle with care • During operation, please handle with care for exampl
A1 A2 x1 B1 Accessories A3 Pad Sound Module MS310 Bass Drum Controller x5 x1 x1 B2 B3 Drum Stick (1 set) User Manual Cable Tie x1 x1 x2 L2 L1 Adapter P1 Floor Pad x4 P2 Ø3.81 (cm) Stopper x2 L4 L3 L-L Mono Sound Cable (Black) L-L Mono Sound Cable (Black) L-L Stereo Sound Cable (Red) x4 x2 x1 L:150 cm L:100 cm x1 A4 Hi-Hat Controller P3 Parts P4 Ø2.
C1 C2 Ø1.27 Pad Connector Ø3.81 - Ø2.22 Adjustable Connector C5 Ø3.81 - Ø2.22 Connector x2 ×1 S3 S4 S5 S6 S7 S8 C4 Ø3.81 - Ø1.27 Ø1.27 - Ø2.22 Connector Connector x2 x3 C6 Ø3.81(cm) U-shape Plate & Double Screws S2 C3 x5 x2 S1 Connectors Ø3.81cm Support Stand Ø3.81cm Ø2.22cm Ø3.81cm Ø1.27cm x2 40 x2 20 cm ×1 Ø3.81cm Ø3.81cm 40 cm ×1 (Red) (Red) 40 cm ×2 57 cm ×1 40 40 20 Ø1.
Connectors C1 C3 C2 Expansion 68 7
C4 C5 123 89 8
Step 1 S1 Ø3.81cm (40cm) S2 Ø3.81cm (20cm) S3 P1 x1 (left) x1 (center) Ø3.
Step 2 S4 Ø3.81cm (Red) (40cm) x2 S5 Ø2.22cm (40cm) x2 Ø3.81cm (Red) S6 (57cm) x1 S6 x2 S5 40cm x3 ! Please note the direction of the screw.
Step 3 S7 (40cm) x3 S7 40cm C2 S7 40cm 11
Step 4 S7 (40 cm) x1 (right) S8 (20 cm) x1 (left) P2 P3 x2 x2 S8 20cm P3 P3 P2 S7 40cm P2 12
Step 5 A2 x5 T1 x10 C2 x5 T2 x10 C2 T2 T2 T1 T1 A2 Depression Convex Below are examples of wrong assembly.
Mounting on the stand A1 x1 C6 x1 A1 Position the Sound Module onto the Bar and fold the U-Shape Plate upwards around the bar. Secure the U-Shape Plate to the back of the Sound Module with Screws.
Sound Cable x4 L2 L2 (Black) ① HI-HAT ② SNARE ③ TOM1 ⑧ TOM2 (Black) x2 L3 ③ (Black) x1 L3 (Red) Connect the Sound Cables to the Drum Pads,Pedals and Sound Module.
Conecting the Pads ① HI-HAT ② SNARE (Black) ③ TOM1 ① ② optional ④ CYMBAL1 ③ (Red) ④ ⑤ ⑥ ⑤ HI-HAT CTRL ⑥ BASS DRUM CTRL headphone ( 1 / 4" plug ) Amplifier optional ADAPTER (5V1A) (RED) ⑦ CYMBAL2 DC IN ⑦ ⑧ TOM2 ⑨ TOM3 ⑧ optional ⑨ ⑩ LINE IN optional ⑩ BASS DRUM MENU MIDI OUT NOTE ④ CYMBAL1 and ⑦ CYMBAL2 must use Stereo Sound Cables (red, 2 parallel black lines at the tip) for connection to the Sound Module.
Console Control Introduction ③ POWER ① MENU ⑤ ⑥ ② ④ VOLUME ⑤ LINE IN For connection of a sound input source like a portable music player, a microphone, other instruments or another sound source. The sound is directed to both Phone and Line Out. ⑥ MIDI OUT ① DC IN For connection of a sound input source like a portable music player, a microphone, other instruments or another sound source. The sound is directed to both Phone and Line Out. For connection of the power adapter.
Console Operation Percussion Sound Module Percussion Sound Module & Metronome Press these buttons to Select a Drum Style. The Selected Drum Style will be displayed on the left side of the Sound Module’s screen; the picture of the Sound Module, above, displays Selection of ROCK Style. When the Sound Module is turned on, the setting will default to ROCK Style.
Sound Set NOTE Press this button to Select a Sound Set for the current Drum Style. There are up to 4 Sound Sets per Drum Style. TECHNO, MARCH, and TAIKO Styles only have 1 Sound Set. The Selected Sound Set Number will be displayed to the right of a hyphen on the right side of the screen; the picture of the Sound Module, above, displays Selection of Sound Set 1. When the Sound Module is turned on, the setting will default to Sound Set 1. . Press this button to Toggle Reverb On or Off.
Metronome Click Mode (Metronome) Press this button to Switch to the Metronome Display, above, and Turn On the Metronome. While the Metronome Display is shown, press this button again to Turn Off the Metronome. If the Metronome is not Turned Off nor its settings adjusted, the Metronome Display will eventually revert back to the Drum Style & Sound Set Display, and the Metronome will continue to play. Press this button to Select the Metronome’s Beat Count.
Audio Sampling Frequency 16bit 44.1kHz WAV Maximum Polyphony 32 notes Voices 11 Categories, 168 high sound quality audio Drum kits 32 preset drum modes Sensor 128 level ultra realistic velocity sensor Effect Reverb Metronome 30-250 BPM, 3 kinds of beats Wiring Terminal LI N E I N (3 . 5 S t e r e o), P H O N ES (3 . 5 S t e r e o), MIDI OUT(5-pin DIN), DC IN(AC adaptor) Connectors Hi-Hat, Snare, Tom1, Tom2, Tom3, Cymbal1, Cymbal2, Bass Drum, H.H.
Styles & Sounds List 1 ROCK 6 7 8 SNARE TOM1 TOM2 TOM3 CRASH1 CRASH2 HI-HAT SNARE TOM1 TOM2 TOM3 CRASH1 RIDE BELL BASS HI-HAT SNARE TOM1 TOM2 SIDE STICK CRASH1 RIDE CYMBAL BASS 4 HI-HAT SNARE TOM1 TOM2 TOM3 CRASH1 CHINA COWBELL 1 HI-HAT SNARE TOM1 TOM2 TOM3 CRASH1 CRASH2 BASS 2 HI-HAT SNARE TOM1 TOM2 TOM3 CRASH1 RIDE BELL BASS HI-HAT SNARE TOM1 TOM2 SIDE STICK CRASH1 RIDE CYMBAL BASS 4 HI-HAT SNARE TOM1 TOM2 TOM3 CRASH1 CHINA COWBELL 1
How to adjust hight: STEP1 STEP2 STEP3 Loose wing-bolts. OR Pull up or down the S5 pipe to adjust the height. Fasten wing-bolt. For more information please visit our website www.ddrum.
