User Manual

7
Installation
• Clean an area of the windshield where you wish the dash cam to be installed.
This assists in adhesion.
• Open the protection cover of the TF card slot, insert the memory card into the
slot. Pay attention to the front and back sides, and close the protection cover
after completion.
• Remove the protective film from the back of the bracket, attach the adhesive side
of the mount on the windshield where it has an unobscured view of the road, but
does not interfere with driver’s view as shown below.
• Use the installation tool to lift the edges of the windshield/moulding and turn in
the power cable. Connect the dash cam to the car charger (plugged into a
cigarette lighter socket).
• After the car starts, the dash cam powers up and starts recording.
Ideal mounting area
Tuck in the cable