Specifications

7 x 9 inches (178 mm x 229 mm)
Medtronic Confidential
Refer to the “Reference man.” category in doc#163256 for Printing
Instructions.
196407001 Rev A
Programming Transtelephonic Monitor
Transtelephonic Monitor is a feature that can facilitate using transtelephonic
monitoring during a remote patient follow-up procedure. The program-
mable options for this feature are ON and OFF. Refer to “Enhanced Trans-
telephonic Monitoring” in Chapter 13 for an explanation of this feature.
WARNING: Do not program Transtelephonic Monitor to ON if the patient
has an implantable defibrillator (see Chapter 13).
To program Transtelephonic Monitor:
1. Select
Trans Tele
from the parameters listed on the Additional
Parameters screen.
2. From the displayed window of options, select
ON
or
OFF
as desired.
3. Position the programming head and select [
PROGRAM
]. Hold the pro-
gramming head steady until you receive a programming confirmation.
Programming Extended Telemetry
Programming Extended Telemetry to ON will cause the pacemaker to
continuously transmit EGM and Marker Channel telemetry for 24 hours.
Refer to Chapter 15 for information about Extended Telemetry.
NOTE: Because Extended Telemetry increases current drain on the pace-
maker battery, it should be used only when necessary.
To program Extended Telemetry:
1. Select
Extend. Telem
from the parameters listed on the Additional
Parameters screen.
2. From the displayed window of options, select
ON
or
OFF
as desired.
3. Position the programming head and select [
PROGRAM
]. Hold the pro-
gramming head steady until you receive a programming confirmation.
6-8 Using the Programmer