Specifications

7 x 9 inches (178 mm x 229 mm)
Medtronic Confidential
Refer to the “Reference man.” category in doc#163256 for Printing
Instructions.
196407001 Rev A
CHAPTER 6
Programming Pacing
Parameters
About This Chapter
This chapter describes the following programming procedures:
How to program the permanent pacing parameters controlling opera-
tion of the patient’s pacemaker. This procedure is conducted from the
Pacing Parameters screen (see page 6-2).
How to program nominal and saved parameter values (see page 6-6).
How to program the Transtelephonic Monitor and Extended Telemetry
parameters, which are related to follow-up procedures (see page 6-8).
How to program the Status Reset command to verify or clear an ERI
status or clear a pacemaker full electrical reset condition (see page 6-9).
How to program the pacemaker serial number in the event it is cleared
from pacemaker memory by an electrical reset (see page 6-10).
For instructions on programming the parameters of the Diagnostics
function, refer to Chapter 8.
6-1