Specifications

7 x 9 inches (178 mm x 229 mm)
Medtronic Confidential
Refer to the “Reference man.” category in doc#163256 for Printing
Instructions.
196407001 Rev A
Displaying Additional Parameters Settings
The Additional Parameters screen displays the present settings for the
following parameters and provides access to the Status Reset command.
Transtelephonic Monitor (See Chapters 6 and 13)
Extended Telemetry (See Chapters 6 and 15)
Pacemaker Serial Number (See Chapter 6)
Status Reset (See Chapter 6)
To display the Additional Parameters screen, select the [
PARAMETERS
]
menu button, and then select the
ADDITIONAL PARAMETERS
option as
illustrated below.
The Additional Parameters screen appears as shown in the example below.
1. Select [
PARAMETERS
]
menu button.
2. Select
ADDITIONAL
PARAMETERS
option.
Additional Parame-
ters Screen
Interrogate the pace-
maker, if required, to
display settings.
To use this screen for
programming these
parameters, refer to
Chapter 6.
For more about Trans-
telephonic Monitor and
Extended Telemetry,
refer to Chapters 13
and 15, respectively.
4-4 Using the Programmer