Specifications

7 x 9 inches (178 mm x 229 mm)
Medtronic Confidential
Refer to the “Reference man.” category in doc#163256 for Printing
Instructions.
196407001 Rev A
Before You Begin
Prior to using the programmer in a patient session, verify that the program-
mer is properly set up. Refer to Chapters 2 and 3 in the “Programmer
Description and Setup” guide supplied with your 9760 or 9790 programmer
for detailed instructions on setting up the programmer and preparing for a
patient session.
Programmer Setup Checklist
Verify that the following components are properly connected:
1. Programming head
2. Light pen (9760 programmer) or touch pen (9790 programmer)
3. ECG cable
4. Power cord (Connect the programmer to an appropriate power outlet.)
Connecting an External Monitor or Recorder
To connect an external monitor or recorder to the programmer, refer to the
instructions provided in Chapter 9 of this manual.
Connecting Skin Electrodes
For operation of the ECG measurement and display functions, the program-
mer must be connected to skin electrodes on the patient. Use an electrode
lead to connect each skin electrode to the appropriate port on the ECG
cable. Typical electrode placement is shown below.
3-2 Using the Programmer
RA (R)
RL (N)
LA (L)
C* (C)
LL (F)
* Lead does not apply
to 9760 programmer.
( ) = IEC Coding