Specifications

7 x 9 inches (178 mm x 229 mm)
Medtronic Confidential
Refer to the “Reference man.” category in doc#163256 for Printing
Instructions.
196407001 Rev A
Printing Reports After a Session Has Ended
CAUTION: Selecting a pacemaker model to begin a new patient session or
turning the programmer off will clear all data accumulated in programmer
memory from the last patient session.
Procedure
Once you have ended a patient session, but before you select a new pace-
maker model or turn the programmer off, you can print the reports accumu-
lated during that session.
To print the data reports:
1. Select the [
PRINT...
] button on the Automatic Model Select screen. This
button appears only if there is data present from the previous patient
session.
2. Select [
PREVIOUS PATIENT DATA
] from the option window. Do not select a
pacemaker model until printing of the previous session data is
complete.
Transferring Session Data to a Diskette
CAUTION: Selecting a pacemaker model to begin a new patient session or
turning the programmer off will clear any data accumulated in programmer
memory from the last patient session.
Procedure
Once you have ended a patient session, but before you select a new pace-
maker model or turn the programmer off, you can transfer the data reports
accumulated during the session to a computer diskette as described below.
NOTE: When you end a patient session, the Data Transfer To Disk window
(see next page) automatically may appear on the Automatic Model Select
screen. If this window shows, skip steps 1 and 2 of the procedure. If you do
not wish to use this function, select the [
CANCEL
] button.
Procedures to Know Before You Begin 2-13