Specifications

7 x 9 inches (178 mm x 229 mm)
Medtronic Confidential
Refer to the “Reference man.” category in doc#163256 for Printing
Instructions.
196407001 Rev A
Automatic Printing with the Printer Trace
Mode
To turn the printer Trace mode ON or OFF:
1. Select
TRACE
...
from the Print menu options.
2. From the Trace window, select [
TRACE MODE ON
] or [
TRACE MODE
OFF
] as desired.
3. Select [
EXIT
] to close the window.
Turning the Trace mode on causes the printer to automati-
cally print information as it is generated during a patient
session. The use of such commands as Program, Interrogate,
Cancel Magnet, Emergency, or Measure ECG are documented
on the printout if confirmation of the command execution is
received. The parameters and values included in a program-
ming, interrogation, or measurement are printed as shown in
this example.
Graphic information such as a Diagnostic report is not printed
by the Trace mode. Using the Trace mode does not affect the
option to print specific reports manually.
During the printing of a real-time ECG recording, the Trace
mode does not function. However, data generated while the
programmer is printing frozen waveforms will be saved and
printed when the frozen waveform printout has completed.
Turning the Trace mode off disables this automatic printing
feature. Printing will occur only when you select a specific
Print option.
2-12 Using the Programmer