Specifications

7 x 9 inches (178 mm x 229 mm)
Medtronic Confidential
Refer to the “Reference man.” category in doc#163256 for Printing
Instructions.
196407001 Rev A
Data Summary — Selecting this option prints a summary of the interro-
gated data. Included are the event data accumulated since the last patient
session.
Battery/Lead Data — Selecting this option initiates a printout of the
real-time measurements associated with the Battery/Lead data function.
Diagnostics Data Table — This option prints the recorded Diagnostic data
in tabular form. This is the same data the programmer uses to create and
display the Diagnostic Graph.
Threshold Results — Selecting this option prints the data accumulated
during a patient session from the use of the Threshold Test function. The
programmer can store up to 32 test reports for printing during a patient
session.
Sensing Results — Selecting this option prints the data accumulated from
the most recent use of the Sensing Test function.
Activity Thld Results — Selecting this option prints the results of an
Activity Threshold test.
Activity Exercise Test — While the test results screen is displayed follow-
ing an Activity Exercise test, selecting this option will print the displayed
test results, including the test graph. If the test results screen is not dis-
played, the printout will not include the graph. (Selecting Current Screen
Report will also print the displayed test results and graph.)
Measured Values — Prints the most recent parameter values obtained from
using the Measure ECG function.
Waveforms — Available only if the current screen is the Freeze screen.
This option prints a 10-second chart of frozen ECG and telemetry traces.
Waveform Segment — Available only if the current screen is the Freeze
screen. This option initiates a printout of only that portion of the 10-second
frozen traces selected with the on-screen calipers.
Full Report — Prints the data accumulated for printing during the patient
session. Reports included in this printout (if the data is available) are
Parameter Values, Data Summary, Battery/Lead Data, Threshold Results,
Sensing Results, Activity Threshold and Exercise Test results, and Mea-
sured Values. This printout does not include data, such as waveforms or
graphs, which can only be printed while the respective screen is displayed.
Trace ... — Selecting this option displays two buttons that let you turn the
printer “Trace” mode on or off. The following section describes the printer
Trace mode.
Procedures to Know Before You Begin 2-11