Specifications

7 x 9 inches (178 mm x 229 mm)
Medtronic Confidential
Refer to the “Reference man.” category in doc#163256 for Printing
Instructions.
196407001 Rev A
Printing Reports During a Patient Session
The [
PRINT
] menu button lets you select and print various reports of the data
generated during a patient session. Most data is temporarily stored for the
duration of the patient session and can be printed at any time during the
patient session. However, some types of data, particularly graphic data,
must be printed while it is displayed on the screen. All data stored in pro-
grammer memory is cleared when you start a new patient session.
Selecting a Print Option
Selecting a Print option may cause on-screen buttons, except [
EMERGENCY
],
to be unresponsive for several seconds while data is being formatted for
printing. (The formatting of Diagnostic graphs may take about half a
minute.) Selecting a Print option will cancel an ECG recording in progress.
To print a report, select the [
PRINT
] menu button, and then select the
appropriate print option from the drop-down menu. All possible options
will be listed, but only those in bold face type are selectable. A report
cannot be selected until data for that report has been generated.
About the Print Options
Current Screen Report — If data is
available, selecting this option prints the
report for the function associated with
the presently displayed screen. For
example, selecting this Print option
while the Pacing Parameters screen is
displayed results in the printing of a
Parameter Values report. Use this
option to print graphic reports, which
are available only while the data is displayed. These reports include the
Diagnostic Graph, Strength-Duration Curve, Activity Exercise Test results
graph, and Marker Channel Diagram.
Parameter Values — Selecting this option initiates a printout of all
pertinent parameter values presently programmed and confirmed in the
pacemaker.
Print Options
2-10 Using the Programmer