Specifications

7 x 9 inches (178 mm x 229 mm)
Medtronic Confidential
Refer to the “Reference man.” category in doc#163256 for Printing
Instructions.
196407001 Rev A
Canceling the Programming Head Magnet
“Cancel Magnet” is a temporary programming command that cancels the
effect of the programming head magnet. It allows the pacemaker to operate
in its permanently programmed mode (such as the DDD mode) while the
programming head is held in position.
The [
CANCEL MAGNET
] button appears near the lower right corner of all
function screens except the Battery/Lead screen described in Chapter 4.
To execute the Cancel Magnet command:
1. While the programming head is positioned over the pacemaker, select
the [
CANCEL MAGNET
] button.
2. Watch for the “Magnet cancelled” message.
Continue to hold the programming head in place for as long as you
want the magnet canceled. Lifting the programming head terminates
the Cancel Magnet function.
Cancel Magnet
Button
Ï
Procedures to Know Before You Begin 2-9