Specifications

7 x 9 inches (178 mm x 229 mm)
Medtronic Confidential
Refer to the “Reference man.” category in doc#163256 for Printing
Instructions.
196407001 Rev A
c) Repeat a and b until the screen displays the parameter settings you
want to use as Site Nominal values for the selected pacemaker
group.
4. To save the parameters shown on the setup screen as Site Nominal
values, select the [
SAVE PROPOSED] button.
A message at the bottom of the screen and an audible “beep” will
confirm that the values have been saved.
NOTE: The [
SAVE PROPOSED] button will not be displayed if any of
the selected values form a restricted parameter interaction (as indicated
by values displayed in reverse video, see page 6-3). All parameter
conflicts must be resolved before the selected Site Nominal values can
be saved.
5. Select [
END SITE NOMINALS] to exit the Site Nominal setup feature.
NOTE: If you want to exit this procedure without saving a set of Site
Nominal values, you can select the [
END SITE NOMINALS] button at any
point in the procedure prior to step 4.
Other Options
Site Nominals for the Diagnostics function
Following step 2 of the setup procedure, the Site Nominal Setup screen
automatically opens to the Pacing Parameters setup screen. To establish a
set of Site Nominal parameter values for the Diagnostics function, select
the [
DIAGNOSTIC PARAMETERS] button and proceed with steps 3, 4 and 5.
If you have completed the procedure for setting up and saving values for
Pacing Parameters, you may repeat the procedure for Diagnostic Parameters
by selecting the [
DIAGNOSTIC PARAMETERS] button following step 4, rather
than exiting the Site Nominal setup feature.
Convenience buttons
The following buttons may be used during the Site Nominal setup
procedure:
[
SET TO MEDTRONIC] Select this button if you want the setup screen to
display Medtronic nominal values as pending
values for all parameters. This feature is useful
if you want to use Medtronic values as a starting
point for setting up a new set of Site Nominal
values.
9-8 Using the Programmer