Specifications

7 x 9 inches (178 mm x 229 mm)
Medtronic Confidential
Refer to the “Reference man.” category in doc#163256 for Printing
Instructions.
196407001 Rev A
Setting the Time and Date
If the time or date displayed and printed by the programmer’s clock and
calendar function is incorrect, use the following procedure to enter the
correct setting.
1. Display the Automatic Model Select screen (see page 3-4) as follows:
If the programmer is not operating, turn the programmer on. The
start-up sequence will automatically display this screen.
If the programmer is operating and a pacemaker model has been
selected, end the patient session by selecting [
END SESSION
].
2. From the Automatic Model Select screen, select the [
SETUP
...
] button.
3. From the displayed setup options, select [
SET TIME AND DATE
].
4. In any order, select the appropriate [∧
∧∧
∧] increase or [∨
∨∨
∨] decrease button
to change the time or date setting.
NOTE: The time must be entered on the basis of a 24-hour clock, with
00:00 being midnight and 12:00 being noon.
5. When you have selected the desired settings, press [
ACCEPT
]. If no
further adjustments are necessary, press [
RETURN
].
Set Time and Date
Screen
This screen shows
the current settings
for time and date.
Use the [
∧
∧∧
∧
] and [
∨
∨∨
∨
]
buttons to adjust the
settings.
9-2 Using the Programmer