User's Manual

• Do not expose to temperatures above 60°C (140°F).

• Replace only with the battery pack designated for this product.

• Recycle or dispose of used battery as stipulated by local regulations.

1. Align the battery’s exposed copper contacts with the battery connectors at the bottom part of

the battery compartment.

2. Insert the contacts side of the battery first and then gently push the battery into place.

3. Replace the back cover.

1.3 Charging the Battery

New batteries are shipped partially charged. Before you start using your device, it is

recommended that you install and charge the battery. Some batteries perform best after several

full charge/discharge cycles.

Note: Only the AC adapter and USB sync cable provided with your device must be used to

charge the device.

Connect the USB connector of the AC adapter to the sync connector on your device, and then

plug in the AC adapter to an electrical outlet to start charging the battery.

As the battery is being charged while the device is on, a charging icon appears in the title bar of

the Home screen. After the battery has been fully charged, a full battery icon appears in the title

bar of the Home screen.

Warning:

• Do not remove the battery from the device while you are charging it using the AC or car

adapter.

• As a safety precaution, the battery stops charging before it overheats.

1.4 Starting up the device

Power on/off

To power off your phone, press & hold POWER. On release, the Phone options menu opens.

Select ‘Power off’ and confirm.

To power on again, press & hold POWER.

Silent mode

To silence your phone quickly, press & hold the – volume button to zero volume. Or on the

Home screen, touch

and select Settings > Audio Profiles > ‘Silent’ check box.

Screen sleep