Tus neeg siv phau ntawv

Shenzhen D&C Security Technology Co.,Ltd
Email: [e-mail]
Brief User Manual:
This Camera is a 1080P AHD/CVI/TVI/CVBS 4 in 1 Hybrid Camera. So it can work with
AHD/CVI/TVI/960H old traditional DVR.
In default, we have adjusted the cameras into CVBS, because it can work with all type
DVR. However,CVBS mode is only 800TVL,not High Definition. So, when you receive
the camera, you can adjust the camera into the working type of your DVR to get 1080P
High Definition.
OSD Control：
Firstly,Connect the camera to DC12V power adaptor.
Switch to AHD: Press&Hold Upward for 10 Seconds
Switch to TVI: Press&Hold Leftward for 10 Seconds
Switch to CVBS: Press&Hold Rightward for 10 Seconds
Switch to CVI: Press&Hold Downward for 10 Seconds
Or you can change the camera working mode by camera menu. Press middle of the
OSD button,then you can see the camera menu. Do as the following Steps:
Go to VIDEO SETTING---Change HD from CVBS to CVI/TVI/AHD according to your
DVR type---Change STANDARD from NTSC to 1080P 30 or 720P 30 according to your
DVR type---APPLY & REBOOT(make sure to do this last step)
However, if your DVR is traditional 960H DVR, please keep the camera at 960H CVBS
working mode, do not change it. Otherwise the camera cannot show image.
Usage Note:
For the Camera Glass Cover,although we have used scratches-resistant Glass
Cover,please still handel it carefully.
if the Glass Cover is not too dirty,please just blow the dirst off it. If it is too
dirty,please clean it with a clean & soft cloth gently & softly. Do not use a Brush or
Broom to clean it,as the bristles on the brush or broom are too sharp and easily
scratch the cover.
And if you meet any question about the camera usage,please do not hesitate to let
us know,we can help you!!