User manual

dCS Puccini Player User Manual Software Issue 1.4x
October 2013
Puccini Player Manual v1_4x.docx Page 21 English version
Using the Menu
The menu gives the user access to a range of additional features. It also allows new features and
performance enhancements to be added at a later date by software upgrades.
The menu is controlled by four buttons.
Press the MENU button to open the menu or select a setting.
Press the
> button to page forward through the menu.
Press the
< button to page backward through the menu.
Press the POWER button to close the menu or just wait 5 seconds.
Use the Menu Guide sheet to help you find the right menu.
There are five top-level menu pages:
The INFORMATION menu gives software issues, serial number, contact details and unit
set-up details.
The SETTINGS menu allows you to set some features that are not directly accessible
from the front panel.
The SET-UP menu gives access to settings that are usually changed only when the
system is installed.
The DISPLAY SETTINGS menu is used to adjust and test the display.
The SIGNAL GENERATOR menu is used to check the system during set-up.
Use the
> button to move the highlight to the menu you want, then press the MENU button to select it.
The next menu level down is displayed. Use the
> button to move the highlight to the menu page you
want, then press the MENU button to display the information or change the setting.
Select the exit icon to go back to the previous menu level.